12 kilo San Franciscan SF-25 - 2016 Model - Very Good Condition - Used
12 kilo/25 lb. San Franciscan SF-25 with Combo Chaff Collector/Afterburner
Here's another solid San Franciscan's work horse, the SF-25, now available. Strutting a soothing yellow finish, it's in very good condition, reported fully operational with no issues.
Run time on this one over its 6 years roasting has been approximately only 2-3x p/week. Last used on 10/1/22. Constantly serviced and maintained in a plant known for impeccable equipment standards.
This one is fueled by natural gas and powered on 220v single phase. Fuel conversion kits are available from San Fran if needed. Comes with digital roast profile output for connection to Cropster/Artisan type profiling software.
This offering has the SF combo cyclone/afterburner. Note: Check the photo. Behind the ladder and down at the bottom of the chaff collector, you'll note there was a small chaff fire in the base. Cosmetic damage only. Equipment fully functional.
The SF-25 is able to roast from 6 pounds (3 kg) to 25 pounds (12kg) of green coffee per batch with up to 4 roasts per hour, providing a maximum roast capacity of 100 lb. per hour (48 kg/hr). READ ALL THE DETAILS BELOW FROM SF WEBSITE.
LET'S GET THIS ONE TO YOUR ROASTERY, NOW!
QUICK VIEW DETAILS:
|DIGITAL ROAST CONNECTION:||Yes|
|BURNER FUEL:||Natural Gas
|POWER:||220 volt/60 Hz/Single Phase|
|INCLUDED EQUIPMENT:||Afterburner/Chaff Collector combo unit|
|BATCH:||6 lbs. (3k) - 25 lbs. (12k) per batch|
About San Franciscan Roasters
The Legendary SF25: Environmentally Friendly Small-Batch Coffee Roaster
The SF25 from the San Franciscan Roaster Company is powerfully built and meticulously designed to produce great roasts, time after time. The SF25 is able to roast from 6 pounds (3 kg) to 25 pounds (12kg) of green coffee per batch with up to 4 roasts per hour, providing a maximum roast capacity of 100 lb. per hour (48 kg/hr). The SF25 is able to run on either natural gas (LNG) or propane (LP). In order to boost efficiency, the SF25 is outfitted with an afterburner specifically designed to comply with the most stringent air quality control mandates. The San Franciscan Roaster Company goes above and beyond to offer the best products to specialty drum coffee roasters all around the world. All of our roasters are handcrafted with love in Carson City, Nevada. If you’re looking for the perfect small-batch roaster for your coffee shop, choose the SF25!
The SF25 Roasts Up To 100 lbs. Per Hour
- Roasts between 6 lbs (3 kg) and 25 lbs (12 kg) of green coffee per batch
- A maximum roast capacity of 100 lbs per hour (48 kg/hr)
- Roasting time varies between 10 to 15 minutes, depending on roaster preferences
Advanced Components and Classic, Handmade Beauty
In order to make the coffee roasting process as efficient and eco-friendly as possible, the SF25 is outfitted with an afterburner that burns up any smoke and odor created from the roasting process. This addition, which comes standard with all SF25 roasters, leads to a smaller environmental impact. The afterburner and chaff collector are combined in a separate cylinder behind the roaster for ease of maintenance. Much like our other roasters, the SF25 is compatible with most data-logging programs.
We only use high-quality, American-made motors, sprockets and bearings. The gas and electric parts of the SF25’s are also American-made to guarantee quality and longevity.
American-Made Roasters for the Artisan Coffee Roaster
At The San Franciscan Roaster Company, we make use of only the highest quality materials in order to create roasters that will last a lifetime. Every single one of our roasters is meticulously handcrafted to suit your exact specifications. Our products are all designed and built in the United States, with American-made parts.
Suggested Installation Instructions
There should be a minimum of 18″ clearance completely around the machine. The vent piping should be rated for the US Standard UL-103HT, approved for positive pressure, 8″ inside diameter.
- The machine is fused with 20 amp. main fuses.
- A 30 amp. source to the machine will be more than adequate.
- 220 volt, four-prong grounded plug-in.
Gas line requirements:
- The gas supply should operate at 7"WC Natural Gas or 11"WC Propane at 100,000BTU for the Roaster and 250,000BTU for the afterburner, with a 350,000BTU combined maximum output. Check with your local gas company.
- The roaster should be bolted with 4 1/2″ floor anchor bolts. A roped off or fenced in operating area is suggested.