INTERMEDIATE FOOD GRADE MIXERS 

There is a huge jump in price when you step into the "food grade" world using Stainless Steel as the metal of construction . . . but once over the sticker shock, the next thing to consider is the actual mixing motion.

Double Action Ribbons

We are choosing to make these units be using double-action ribbons that cause the coffee to flow left to right as well as right to left and then going round and round all happening at once.

Speed up the Flavoring Process Time

Results: mixing is the most rapid of any method of any mixer. With mixing beans for blending - your time of mixing would be only a few minutes, but on adding flavoring, the mixing time would be a little longer as the idea is allowing the beans to rub together with the flavoring and "work" that flavoring into the center of the bean and not just sitting on the outside.

The mixing motion actually makes the flavoring process go faster due to the amount of movement instead of the rotating poly drum method in the smaller sized applications.

Safety and Protection

Notice too, that we have hand protectors, belt guards, all clean and wash down activities in a total food-grade provision. The drive gears and chain parts are all wash-down proof. Even the welds and corners are all polished to that there is no place for any growth to happen. We are trying to take the mystery out of mixing and blending.

Ordering and Availablity

If you think of anything else that we have missed or is not clear - then pick up the phone and ask directly.

These units are normally in stock or have only a short delivery time due to a motor or utility change.

Models Available

Polished 304 stainless steel contacts, trough measures 32" long x 18" wide x 22" high, with mirror interior finish, 1/10 shell thickness. Hinged cover with backrest, safety grates. 2-1/4" solid stainless steel shaft, 1-1/2 x 1/4" thick outer ribbon, 1-1/5" x 1/4" thick inner ribbon, 66 RPM ribbon speed. Mixer is driven by 3 HP, gearhead washdown motor thru rollerchain. Motor is an SEW IP55/IE3 UL rated drive. Mixer has a 4 center bottom discharge, knife style pneumatic slide gate, 14"  discharge height. Stainless steel frame & legs.

1 Cuft (21 lb/45 lb) Double Ribbon Mixer

Knife Style Pneumatic Slide Gate Polished 304 stainless steel contacts, trough measures 18" long x 11" wide x 13" deep, with mirror interior finish, 2.5mm shell thickness. Includes hinged cover with backrest and safety grate. 1-1/2" solid stainless steel shaft, 25mm wide x 6mm thick outer ribbon, 32mm wide x 6mm thick inner ribbon, 58 RPM ribbon speed. Mixer is driven by 1 HP direct connect motor thru rollerchain. Mixer has a 2-1/4" center bottom discharge, manually operated butterfly valve, 10" discharge height. Includes split seals that are set up for liquid service. Stainless steel frame & legs.

Drawing of 5 Cubic Foot Model: